Analog Devices

    C. Chaney, “Long term measurement of bandgap voltage and system level integral non-linearity drift”, 2022.

    R. Chavez, “Design of a precision, very low 1/f noise, low power, rail-rail l/O, integrated bi-CMOS operational amplifier”, 2022. (pdf)

    C. Chu, “ML for loop gain identification of DC/DC converters”, 2022. (pdf)

    N. Hidalgo, “A basic half bridge silicon carbide gate driver for electric and hybrid-electric vehicle application”, 2022. (pdf)

    M. Jin, “Machine learning methods for super-resolution in sparce sensor arrays”, 2021. (pdf)

    E. Murray, “An area-efficient integrated gate driver”, 2021. (pdf)

    A. Persad, “Peak currend mode driver for thermoelectric cooler”, 2021. (pdf)

    I. Estay Forno, “Design and analysis of a 200 volt, high slew rate, current-limited operational amplifier”, 2019. (pdf)

    A. Lemus, “Analysis and design of package-integrated galvanically isolated power converter with high coreles transformer working voltgage”, 2019. (pdf)

    H.W. Love, “Design of a power-scaling, precision instrumentation amplifier using correlated double sampling”, 2019. (pdf)

    G. Kakuru, “Design of on-chip monotoring circuits for clock delay and temperature”, September 2016. (pdf)

    K. Tran, “A spread-spectrutrum clock generator using phase interpolation for EMI reduction”, 2014 (pdf)

    S. Zheng, “A low cost asynchronous eye diagram reconstruction system for high speed links”, 2013. (pdf)

    N.I. Micheva, “Design port and optimization of a high-speed SAR ADC comparator from 65nm to 0.11[MU]M”, June 2011. (pdf)

    Applied Materials

    W. Yeung, “Accurate characterization of nanophotonic grating structures”, February 2020. (pdf)


    T. Olabinjo, “Click-based ultrasonic gesture recognition”, May 2020.


    Z. Gromko, “Accelerated channel operating margin for automated context and application to design optimization”, 2022. (pdf)

    A. Kaphle, “Offline reinforcement learning accelerated monte carlo tree search for printed circuit board synthesis”, 2022. (pdf)

    P.B. Crocker, “Physically constrained simplified PCB placement using reinforcement learning”, 2021. (pdf)

    T. Smith, “Data driven surrogate models for faster SPICE simulation of power supply circuits”, 2021. (pdf)

    Z. Zumbo, “Genetic optimization applied to via and route strategy”, February 2020. (pdf)

    J.R. Murphy, “Neural network fitness function for optimization-based approaches to PCB design automation”, September 2020. (pdf)

    Cambridge Mobile Telematics

    Y. Li, “Building a cross-platform bridging library for native mobile SDKs”, 2022. (pdf)

    K. Pruegsanusak, “Understanding drivers’ risk behaviors from dashcam videos”, May 2020. (pdf)

    L. Nguyen, “A vehicle classification algorithm based on telematics data”, 2018 (pdf)

    Cell Signaling Technology

    C. Simpson, “Systemic analysis of changes in protein modification and gene coexpression networks in cancer”, September 2019. (pdf)

    Charles Stark Draper Laboratory

    N. Klugman, “Modeling and design of magnetic flux compression generators”, February 2020. (pdf)

    N. Waltman, “Sequential decision making for automatic modulation classification”, June 2019. (pdf)

    W. Loucks, “Kerberized identity-based encryptrion and the interoperability of space-based systems”, 2019. (pdf)

    S. McCuen, “A wireless communication link for a miniature, implantable neuromodulation system”, 2019 (pdf)

    C. Doshi, “A deep learning approach to state estimation from videos”, 2018. (pdf)

    I. Donato-Ridgley, “Decoding team performance in self-organizing collabration network using community structure”, 2018. (pdf)

    V. Kee, “Stimulus tracking. object registration, and mapping (STORM)”, 2018. (pdf)

    J. Mathus, “The lightning network cross-chain exchange: a decenteralized approach for peer to peer exchange across blockchain”, 2018. (pdf)

    T. Galvin, “Faster streaming algorithms for low-rank matrix approximations”, 2014 (pdf)

    E. Sun, “A many-core software framework for embedded space computing”, 2013. (pdf)

    B.C. Gardiner, “Compressive image feature extraction by means of folding”, 2012. (pdf)

    IBM Research

    B. Perez, “Design optimizations for action detection applications”, 2022. (pdf)

    E. Bensaid, “Multimodal Generative Models for Storytelling”, February 2021. (pdf)

    Iterative Scopes, Inc.

    A. Wang, “Real-time computer-aided polyp detection and localization for clinical applications”, May 2020. (pdf)

    Jet Propulsion Laboratory

    J. Arnold, “Ground station mixed-signal PCB and SFP ethernet-to-optical connector for the deployable optical receiver aperture (DORA) cubesat”, 2022. (pdf)

    L. Trautman, “Increasing mars 2020 mission efficiency via SAPP operations improvements and AEGIS V&V”, 2022.

    Lawrence Livermore National Laboratory

    A. Wubshet, “An investigation of USRP FPGA as a platform for quantum sensing and control”, May 2020. (pdf)

    L. Green, “Electronics for flow through electrode capacitive desalination”, May 2020. (pdf)

    M. Partha, “A novel method for Multilevel Autonomous Clustering (MAC) for anomaly detection in distributed systems”, May 2020. (pdf)

    Linear Technologies

    A. Sloboda, “AC coupled ripple reduction method for chopper-stabilized ampliers”, 2018. (pdf)

    J. Whitney, “Alternative topologies for the low-voltage buck converter”, 2018. (pdf)

    C. Uyehara, “High voltage sampling scheme independent of capacitor voltage coefficient for a delta sigma modulator”, 2017. (pdf)

    C. Chen, “Integrated DC-DC converter with ultra-low quiescent current”, 2013. (pdf)

    T. Bogoda, “Adaptive primary side control for a wireless power transfer optimization,” 2012. (pdf)

    J. Cohen, “Peak Ppower tracking for a solar buck charger”, June 2010. (pdf)


    W. Hu, “Variationnal autoencoders for discovering causally interpretable latend factors”, 2022.

    MIT Lincoln Laboratory

    B. John,”Algorithm-agnostic sytem for measuring susceptibility of cryptographic accelerators to power slide channel attacks”, 2022. (pdf)

    I. Liu, “Designs and experiments to improve reliability of microhydraulic electrowetting actuators”, 2022.

    J.T. McGuire, “It’s multi-domain coincidence processing and memory architecture for real-time geiger mode LiDAR”, 2022. (pdf)

    M. Hutchinson, “Applying high performance computing to early fusion video action recognition”, 2020. (pdf)

    M. Szabo, “Adaptive gain spatial receiver for wide dynamic range communication links”, 2020. (pdf)

    L. Goggin, “Runtime execution tracing and alignment with PANDA”, 2019. (pdf)

    L. Vigano, “Modeling torso imaging via time-domain diffuse correlation spectroscopy”, 2019. (pdf)

    T. Leech, “Explainable machine learning for a task planning in robotics”, 2019. (pdf)

    R. Wang, “A system for dynamic slicing and program visualization”, 2019. (pdf)

    A. Velez, “Utilizing I/Q data to enhance radar detection and accuracy metrics”, 2019. (pdf)

    J. Chang, “Small satellite optical communication receiver for simultaneous spatial tracking and data demodulation”, 2019. (pdf)

    V. Sarge, “Evaluating Simulink HDL coder as a framework for flexible and modular hardware description”, 2018. (pdf)

    J. Griffin, “Exploring data compression for a distributed aerial relay application”, 2017. (pdf)

    G. Falkenburg, “High-order compensation of self-phase modulation in laser communication systems”, 2017 (pdf)

    L. Mercer, “Deployment of a next generation networking protocol”, June 2016. (pdf)

    A. Greene, “Experiments towards mitigation of motional heating in trapped ion quantum information processing”, 2016. (pdf)

    B. Horkley, “Optical communications with a Geiger mode APD array”, 2016. (pdf)

    G. Pantazis, “Design and testing of a UAV-based, through-rubble vital sign detection RADAR using metaheuristic topology optimization”, June 2015. (pdf)

    A. Schmahmann, “SURGE: the Secure Cloud Storage and Collaboragtion Framework”, 2014 (pdf)

    N. Forrester, “Surface reconstruction from interferometric ISAR data”, February 2014. (pdf)

    J.W. Colosimo, “Doppler channel emulation of high-bandwidth signals”, 2013 (pdf)

    G.R. Steinbrecher, “Indium arsenide quantum dots for single photons in the communications band”, 2013. (pdf)

    T. Tzanetos, “Embedded avionic with Kalman state estimation for a novel micro-scale unmanned aerial vehicle”, June 2013. (pdf)

    J. Lane, “Control of a MEMS fast steering mirror of laser applications”, 2012. (pdf)

    A. Shcherbina, “Short tandem repeat (STR) profile authentication via machine learning techniques”, 2012. (pdf)

    D.L. Gerber, “Adaptive transmit beamforming for simultaneous transmit and receive”, 2011. (pdf)

    M. Scarito, “Design and development of an airborne microwave radiometer for atmospheric sensing”, 2011. (pdf)

    N. Serrano, “Autonomous quadrotor unmanned aerial vehicle for culvert inspection”, 2011. (pdf)

    K. Dietz, “Acoustic and linguistic interdependencies of irregular phonation”, June 2010. (pdf)

    Z. Tao, “Improved uncertainty estimates for geophysical parameter retrieval”, June 2010. (pdf)


    T. Zavarella, “A methodology for using eBPF to efficiently monitor network behavior in Linux Kubernetes clusters”. 2022. (pdf)

    A. Talkar, “Project flow: simulating a new microservices framework”, 2021. (pdf)

    T. Tran, “Load balancing in NetApp’s clustered storage systems”, 2021. (pdf)

    P. Wu, “Short-term forecasting of storage workload patterns”, 2021. (pdf)

    R. Kekelishvili, “DHISC : Disk Health Indexing System for Centers of Data Mangement”, 2017. (pdf)

    A. Rice, “Design and simulation of a 20 Gpbs communication channel”, June 2015. (pdf)

    M. Rybak, “Characterizing dielectric materials with a feedback-based model”, 2014. (pdf)

    K. Hsiue, “FPGA-based hardware acceleration for a key-value store database”, 2014. (pdf)

    T.R. Grusecki, “Improving block sharing in the Write Anywhere File Layout file system”, 2012 (pdf)

    A. Jiang, “HTML5 vs. Adobe Flash: from the end user standpoint”, 2012. (pdf)

    H. Mutiso, “Multi-node mirrored NVRAM in a virtualized environment”, 2011. (pdf)

    H. Wong, “PCI Express multi-root switch reconfiguration during system opteration”, 2011. (pdf)

    N.G. Zehender, “Network assisted file system consistency checking”, 2011. (pdf)

    D. Warnakulasuriyarachc, “Design and simulation of a PCI express gen3.0
    communication channel”, June 2010.(pdf)


    C. Vorbach, “Safety assurance for automated vehicles beyond collision avoidance”, 2022. (pdf)

    E. Ahmadi, “Hyperparameter optimization for opaque models in autonomous driving applications”, September 2021. (pdf)


    G. Pailet, “Using sports videos to showcase exciting content to viewers”, 2022. (pdf)

    R. Liu, “Real-time social media content recommendation for live sports events”, 2022. (pdf)

    L. Chen, “Learning about media Users from movie rating data”, September 2020. (pdf)